Stage 3 - Testing & Verification

Product Description

Stage 3: Testing & Verification

This involves the following steps briefly outlined below.

1) Horn Testing:

• All horns are tested in-house in our purpose built 5 Mtr Anechoic Test Room or Anechoic Chamber.
• Decibel levels are set to customers specifications.
• Decibel Readings are recorded and logged.
• The quality, consistency and clarity of the horn tone is checked to ensure it meets specification.

2) Valve Testing:

• All valves are tested in-house.
• Testing is carried out using our purpose built testing jigs.
• Valves are put through a variety of tests to ensure they are functioning to the required specification.
• All test results are recorded and checked to ensure they meet the required specification.

3) Gauge Testing:

• All Gauges are calibrated in-house in our temperature controlled calibration room.
• Gauge calibration is carried out using nitrogen (lower pressure) or oil (higher pressure).
• All calibration results are recorded and checked to ensure they meet the required specification.
• Calibration Certificates Of Conformity can be supplied upon request.